Production controller
Company Name:
Department of Defense
Only applicants that are currently employed as a Wyoming Army National Guard permanent military technician or an indefinite military technician will be considered for this vacancy. Excepted Service Permanent Full Time
Click for information about Wyoming Military Dept.
WYOMING MILITARY DEPARTMENT DUAL STATUS TECHNICIAN
IN-SERVICE VACANCY ANNOUNCEMENT
Open to presently employed Wyoming Army National Guard Military Technicians or Indefinite Military Technicians who competed for their positions
WYOMING ARMY NATIONAL GUARD MEMBERSHIP IS REQUIRED : This is an excepted position that requires membership in a compatible military assignment in the Wyoming Army National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted position constitutes concurrence with these requirements as a condition of employment. Applicants must be presently employed Wyoming Army National Guard military technicians or an indefinite technician who competed for their positions in order to be considered for employment.
Open Area of Consideration:
Area 1: In-Service Technicians - Merit Promotion: All presently employed Wyoming Army National Guard military technicians and indefinite military technicians who competed for their positions may apply for this vacancy.
Technician Info:
Position Title: Production Controller
Position Series/Grade: GS-1152-09
Position Description #: D1255000
Paragraph: 5124
Line #: 070
Location: Field Maintenance Shop (FMS) #4, Cheyenne, WY
Military Grade:
Min: E4/SPC Max: E7/SFC
Applicants'' under- or over-grade will not be considered for this vacancy. Acceptance of this position does not in any way constitute a military grade promotion.
Must currently be permanent or indefinite technician in the WY ARNG. Must submit ERB with application. Refer to Required Documents section for additional details and links. Must submit OF-306, Declaration of Federal Employment, with application. Must obtain a favorable (ANACI) National Agency Check within 1 yr of appt. Must possess or be able to obtain and maintain SECRET security clearance. Relocation costs are not authorized with this vacancy.
a. INTRODUCTION:
This position is located in the Joint Forces Headquarters--State, Logistics Directorate (J-4/G-4), Surface Maintenance Facility. The purpose of this position is to perform maintenance production management, to achieve or maintain desired production levels, to serve as an equipment readiness expert for units supported by the facility, and to provide technical guidance and oversight to a lower-graded Production Controller.
b. DUTIES AND
Responsibilities:
(1) Establishes plans and schedules for maintenance and repair, using multiple process production methods and procedures for a variety of vehicles and equipment such as combat vehicles, heavy-duty engineering and mobile equipment, tracked vehicles, towed and self-propelled artillery, communications and electronic equipment, guided missile systems, and small arms. Implements maintenance plans and monitors progress of accomplishments. Using readiness, production and management reports available from the current automation support program and/or manual system, provides status of equipment, maintenance actions in progress, and location of equipment as required or requested. Responsible for data input of work order information, status changes, supply updates, and other pertinent information. Makes on-the-spot adjustments to repair priorities necessitated by unscheduled maintenance requirements.
(2) Ensures Modified Table of Organization and Equipment (MTO&E;) or Table of Distribution and Allowances (TDA) reportable Line Item Numbers (LIN) are properly managed, reported and accounted for with respect to readiness reports, property accountability reports, and system management. Based on guidance received, prioritizes resources to ensure the highest level of readiness in support of training and mobilization requirements of supported units. Ensures that Army Materiel Status System (AMSS) equipment readiness reports are correct and submitted in a timely manner to meet Department of the Army (DA) reporting suspense.
(3) Programs workload, shop space, and available personnel on a short and long-term basis. Conducts initial and long range planning on matters which include multiple process production, maintenance operations, equipment readiness, including mechanical skills, availability of test and diagnostic equipment, repair parts, annual training requirements, mobilization requirements; and other factors influencing the repair, modification, and maintenance of equipment and readiness reporting.
(4) Ensures that unit Class 9 (CL IX) accounts are funded, budgeted, and executed to maximize readiness. Performs demand analysis on unit CL IX expenses to determine proper stockage to sustain unit mission requirements.
(5) Designates and maintains current maintenance priorities by Force Activity Designator, pacing items, Equipment Readiness Codes (ERC) A, B, and C equipment type, available funds, commander's priority, state/national priorities (in the case of floods, fires, and mobilizations), and unit supported. Using the current automation support system, authorizes the acceptance of equipment for repair; monitors work priorities, current status, and completion of work orders; requisitions and provides status of repair parts; and assures the effective utilization of maintenance personnel. Provides both standard and ad hoc reports on the status of work orders to the supervisor and/or units. Assists supervisory personnel regarding readiness, CL IX funding, production problems and work planning. Assists in the resolution of problems encountered between scheduled or unscheduled production or priority requirements.
(6) Analyzes repair methods and develops control procedures and policies to assure accomplishment of programs to meet priorities and deadlines established by higher authority or support activities. Ensures that this is performed in the most effective and efficient manner possible with good quality control and quality assurance procedures in place. Coordinates with units and other support activities concerning the delivery, status of repair operations, and/or pick up of completed work orders. Coordinates with logistical personnel, equipment specialists, higher ranked management officials, item managers at depots concerning critical shortages of repair parts required to support the maintenance repair program.
(7) Provides technical guidance and oversight to a lower-graded Production Controller. May provide guidance and oversight of mechanics, Tools and Parts Attendants, or other positions assisting in the maintenance production or maintenance management processes. Ensures necessary maintenance workers are available and that required reports are submitted to units and higher headquarters in a timely manner.
DESCRIPTION OF WORK:
Work involves planning, estimating, scheduling, and expediting the use of manpower, machines, and materials in the fabrication or repair of equipment and supply items by mechanical production methods.
GENERAL
Experience:
Must possess experience, education or training which indicates the candidate can reason in quantitative terms; communicate orally and in writing in a clear and concise manner, understanding the terminology and data pertaining to repair operations and process characteristics of the production activity.
SPECIALIZED
Experience:
Must possess at least 24 months experience, education or training preparing job or work orders; scheduling various phases of projects into the production facility; following up to see if work is progressing as planned and arranging for adjustments in materials, machine processes, and work sequencing allowing for changes; and experience with current automation support programs to input data, provide status of equipment, and monitor job order status, monitor work priorities, requisition repair parts, track repair parts status, etc.
NOTE: Specialized experience will be used to determine qualifications for the announced position. Applicants must provide from (MM/YYYY) and to (MM/YYYY ) dates with description of your specialized experience.
MILITARY REQUIREMENTS: Selected candidates will be required to be in a compatible military grade and assignment prior to the effective date of placement.
Enlisted applicant's military grade cannot exceed the maximum military grade authorized. Over-grade applicants must provide a written statement of understanding with application, willingness to be administratively reduced in grade (state specific grade) if selected for this position. A Statement of Understanding is located here .
MILITARY GRADES:
Enlisted Min: E4/SPC Max: E7/SFC
Applicants'' under-grade or over-grade will not be considered for this vacancy. Acceptance of this position does not in any way constitute a military promotion.
COMPATIBLE MILITARY ASSIGNMENTS:
Enlisted: 91, 92, 94
Must possess or be eligible to retrain into MOS.
SUBSTITUTION OF EDUCATION FOR SPECIALIZED
Experience:
A maximum of 12 months of the required experience may be substituted by successful completion of undergraduate study in an accredited college or university at the rate of 30 semester hours for 12 months of experience. The education must have been in fields directly related to Production Control.
Transcripts must be provided only if substituting education for experience.
EMPLOYMENT CONDITIONS:
Technicians are paid through Direct Deposit/Electronic Funds Transfer (DD/EFT).
The Selected applicant must complete a Declaration of Federal Employment: prior to the appointment date.
Military Technicians are ineligible for military enlistment, retention, and student loan repayment bonuses. Acceptance of a Technician position will terminate these military incentives.
Acceptance of a permanent or indefinite position will cause termination from the Selected Reserve Incentive Program (SRIP).
Relocation expenses will not be paid by the Government unless noted in the Announcement.
Military Technicians in the excepted service will wear the appropriate uniform while performing as a Technician.
Veteran's preference does not apply to National Guard Technician positions in accordance with Title 32 USC 709(f).
Once the application process is complete, a review of your application will be made to ensure you meet the job requirements. To determine if you are qualified for this job, a review of your resume and supporting documentation will be made and compared against your responses to the occupational questionnaire. The rating you receive is based on your responses to the questionnaire and supporting documents. If, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your score can and will be adjusted to more accurately reflect your abilities.
Please follow all instructions carefully. Errors or omissions may affect your rating. Making a false statement in any part of your application may result in disciplinary action.
To apply for this position, you must provide a complete Application Package which includes:
1. Your R sum
2. A complete Assessment Questionnaire
3. Other supporting documents :
College transcript(s), only if qualifying based on education
Enlisted Records Brief (ERB)
OF-306, Declaration for Federal Employment
To begin the process, click the Apply Online button to create an account or log in to your existing USAJOBS account. Follow the prompts to complete the assessment questionnaire. Please ensure you click the Submit My Answers button at the end of the process.
Note: To verify your application is complete, log into your USAJOBS account,
, select the Application Status link and then select the more information link for this position. The Details page will display the status of your application, the documentation received and processed, and any correspondence the agency has sent related to this application. Your uploaded documents may take several hours to clear the virus scan process.
To return to an incomplete application, log into your USAJOBS account and click Update Application in the vacancy announcement. You must re-select your resume and/or other documents from your USAJOBS account or your application will be incomplete.
To fax supporting documents you are unable to upload, complete this cover page using the following Vacancy ID 1124614. Fax your documents to .
If you cannot apply online:
1. Click the following link to view and print the assessment questionnaire View Occupational Questionnaire, and
2. Print this 1203FX form to provide your response to the assessment questionnaire and
3. Fax the completed 1203FX form along with any supporting documents to . Your 1203FX will serve as a cover page for your fax transmission.
For this job announcement the following documents are required:
Records Review
Wyoming Army National Guard members must submit Enlisted Record Brief (ERB) with application. Must be current within 6 months.
Personal Resume
Include the following information:
Announcement # and title of the position for which you are applying
Your full name, mailing address, and phone numbers where you can be reached (must be on the resume)
A narrative of your work (paid or unpaid), training, education, and/or other experiences that may be related to this vacancy
Show actual begin and end dates (MM/YY - MM/YY) format for all work experience submitted
List all pertinent military experiences
Describe your duties (work experience) in your own words. Do not submit copies or official position descriptions.
OF-306, Declaration for Federal Employment
College transcripts MUST be submitted when substituting education for experience. Unofficial copies will be accepted. Definitions for Qualifying Education for each GS Grade are located HERE.
NOTE: Incomplete applications will not be considered. It is the responsibility of the applicant to contact William E. Pacheco prior 1600 Hrs on Tuesday, June 03, 2014 to verify all documents have been received. Failure to do so may result in disqualification. Complete and accurate data is essential to ensure fair evaluation of candidates. It is the applicant''s responsibility to ensure the data provided is accurate and complete. Only the experience, qualifications, and education shown on resume can be used to evaluate a candidate''s qualifications for this position.
To submit the documents requested follow the instructions below: Yourresume, curriculum vitae, or any other written format you choose to describe your job-related qualifications. Your document(s) can be submitted electronically using the document upload process or by fax. Please ensure that your resume contains your full name, address, phone and at least your last four digits of your social security number.
Instructions for completing the OPM 1203-FX:
If you are applying to this announcement by completing the OPM 1203-FX form instead of using the Online Application method, please use the following step-by-step instructions as a guide to filling out the required questionnaire. You will need to print the vacancy announcement and refer to it as you answer the questions. You may omit any optional information; however, you must provide responses to all required questions. Be sure to double check your application before submission.
View Occupational Questionnaire
The following Web addresses are provided for your reference to explore the major benefits offered to most Federal employees.
Main site for new federal employees
Flexible Spending Accounts - Allows you to pay for certain health and dependent care expenses with pre-tax dollars.
Health Insurance - Offers over 100 optional plans.
Leave - Most Federal employees earn both annual and sick leave.
Life Insurance - FEGLI Program offers Basic Life Insurance plus three types of optional insurance.
Long Term Care Insurance - FLTCIP provides long term care insurance for Federal employees and their parents, parents-in-law, stepparents, spouses, and adult children.
Retirement Program - Almost all new employees are automatically covered by the Federal Employees Retirement System (FERS). FERS is a three-tiered retirement plan. The three tiers are: Social Security Benefits, Basic Benefit Plan, and Thrift Savings Plan.
1. If you are a male applicant who was born after 12/31/59 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
2. Please _do not send/fax/courier/email any applications or resumes_ to the Wyoming National Guard Human Resource Office, you _must apply on-line or fax your application to the fax number listed on this announcement_ with the prescribed Cover Letter. The Human Resource can only process materials received through USA Jobs.
3. The Wyoming Military Department''s (WYMD) 335, Personnel - General Merit Placement & Promotion Plan, 1 June 2013 is availableHERE.Estimated Salary: $20 to $28 per hour based on qualifications.
Department of Defense
Only applicants that are currently employed as a Wyoming Army National Guard permanent military technician or an indefinite military technician will be considered for this vacancy. Excepted Service Permanent Full Time
Click for information about Wyoming Military Dept.
WYOMING MILITARY DEPARTMENT DUAL STATUS TECHNICIAN
IN-SERVICE VACANCY ANNOUNCEMENT
Open to presently employed Wyoming Army National Guard Military Technicians or Indefinite Military Technicians who competed for their positions
WYOMING ARMY NATIONAL GUARD MEMBERSHIP IS REQUIRED : This is an excepted position that requires membership in a compatible military assignment in the Wyoming Army National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted position constitutes concurrence with these requirements as a condition of employment. Applicants must be presently employed Wyoming Army National Guard military technicians or an indefinite technician who competed for their positions in order to be considered for employment.
Open Area of Consideration:
Area 1: In-Service Technicians - Merit Promotion: All presently employed Wyoming Army National Guard military technicians and indefinite military technicians who competed for their positions may apply for this vacancy.
Technician Info:
Position Title: Production Controller
Position Series/Grade: GS-1152-09
Position Description #: D1255000
Paragraph: 5124
Line #: 070
Location: Field Maintenance Shop (FMS) #4, Cheyenne, WY
Military Grade:
Min: E4/SPC Max: E7/SFC
Applicants'' under- or over-grade will not be considered for this vacancy. Acceptance of this position does not in any way constitute a military grade promotion.
Must currently be permanent or indefinite technician in the WY ARNG. Must submit ERB with application. Refer to Required Documents section for additional details and links. Must submit OF-306, Declaration of Federal Employment, with application. Must obtain a favorable (ANACI) National Agency Check within 1 yr of appt. Must possess or be able to obtain and maintain SECRET security clearance. Relocation costs are not authorized with this vacancy.
a. INTRODUCTION:
This position is located in the Joint Forces Headquarters--State, Logistics Directorate (J-4/G-4), Surface Maintenance Facility. The purpose of this position is to perform maintenance production management, to achieve or maintain desired production levels, to serve as an equipment readiness expert for units supported by the facility, and to provide technical guidance and oversight to a lower-graded Production Controller.
b. DUTIES AND
Responsibilities:
(1) Establishes plans and schedules for maintenance and repair, using multiple process production methods and procedures for a variety of vehicles and equipment such as combat vehicles, heavy-duty engineering and mobile equipment, tracked vehicles, towed and self-propelled artillery, communications and electronic equipment, guided missile systems, and small arms. Implements maintenance plans and monitors progress of accomplishments. Using readiness, production and management reports available from the current automation support program and/or manual system, provides status of equipment, maintenance actions in progress, and location of equipment as required or requested. Responsible for data input of work order information, status changes, supply updates, and other pertinent information. Makes on-the-spot adjustments to repair priorities necessitated by unscheduled maintenance requirements.
(2) Ensures Modified Table of Organization and Equipment (MTO&E;) or Table of Distribution and Allowances (TDA) reportable Line Item Numbers (LIN) are properly managed, reported and accounted for with respect to readiness reports, property accountability reports, and system management. Based on guidance received, prioritizes resources to ensure the highest level of readiness in support of training and mobilization requirements of supported units. Ensures that Army Materiel Status System (AMSS) equipment readiness reports are correct and submitted in a timely manner to meet Department of the Army (DA) reporting suspense.
(3) Programs workload, shop space, and available personnel on a short and long-term basis. Conducts initial and long range planning on matters which include multiple process production, maintenance operations, equipment readiness, including mechanical skills, availability of test and diagnostic equipment, repair parts, annual training requirements, mobilization requirements; and other factors influencing the repair, modification, and maintenance of equipment and readiness reporting.
(4) Ensures that unit Class 9 (CL IX) accounts are funded, budgeted, and executed to maximize readiness. Performs demand analysis on unit CL IX expenses to determine proper stockage to sustain unit mission requirements.
(5) Designates and maintains current maintenance priorities by Force Activity Designator, pacing items, Equipment Readiness Codes (ERC) A, B, and C equipment type, available funds, commander's priority, state/national priorities (in the case of floods, fires, and mobilizations), and unit supported. Using the current automation support system, authorizes the acceptance of equipment for repair; monitors work priorities, current status, and completion of work orders; requisitions and provides status of repair parts; and assures the effective utilization of maintenance personnel. Provides both standard and ad hoc reports on the status of work orders to the supervisor and/or units. Assists supervisory personnel regarding readiness, CL IX funding, production problems and work planning. Assists in the resolution of problems encountered between scheduled or unscheduled production or priority requirements.
(6) Analyzes repair methods and develops control procedures and policies to assure accomplishment of programs to meet priorities and deadlines established by higher authority or support activities. Ensures that this is performed in the most effective and efficient manner possible with good quality control and quality assurance procedures in place. Coordinates with units and other support activities concerning the delivery, status of repair operations, and/or pick up of completed work orders. Coordinates with logistical personnel, equipment specialists, higher ranked management officials, item managers at depots concerning critical shortages of repair parts required to support the maintenance repair program.
(7) Provides technical guidance and oversight to a lower-graded Production Controller. May provide guidance and oversight of mechanics, Tools and Parts Attendants, or other positions assisting in the maintenance production or maintenance management processes. Ensures necessary maintenance workers are available and that required reports are submitted to units and higher headquarters in a timely manner.
DESCRIPTION OF WORK:
Work involves planning, estimating, scheduling, and expediting the use of manpower, machines, and materials in the fabrication or repair of equipment and supply items by mechanical production methods.
GENERAL
Experience:
Must possess experience, education or training which indicates the candidate can reason in quantitative terms; communicate orally and in writing in a clear and concise manner, understanding the terminology and data pertaining to repair operations and process characteristics of the production activity.
SPECIALIZED
Experience:
Must possess at least 24 months experience, education or training preparing job or work orders; scheduling various phases of projects into the production facility; following up to see if work is progressing as planned and arranging for adjustments in materials, machine processes, and work sequencing allowing for changes; and experience with current automation support programs to input data, provide status of equipment, and monitor job order status, monitor work priorities, requisition repair parts, track repair parts status, etc.
NOTE: Specialized experience will be used to determine qualifications for the announced position. Applicants must provide from (MM/YYYY) and to (MM/YYYY ) dates with description of your specialized experience.
MILITARY REQUIREMENTS: Selected candidates will be required to be in a compatible military grade and assignment prior to the effective date of placement.
Enlisted applicant's military grade cannot exceed the maximum military grade authorized. Over-grade applicants must provide a written statement of understanding with application, willingness to be administratively reduced in grade (state specific grade) if selected for this position. A Statement of Understanding is located here .
MILITARY GRADES:
Enlisted Min: E4/SPC Max: E7/SFC
Applicants'' under-grade or over-grade will not be considered for this vacancy. Acceptance of this position does not in any way constitute a military promotion.
COMPATIBLE MILITARY ASSIGNMENTS:
Enlisted: 91, 92, 94
Must possess or be eligible to retrain into MOS.
SUBSTITUTION OF EDUCATION FOR SPECIALIZED
Experience:
A maximum of 12 months of the required experience may be substituted by successful completion of undergraduate study in an accredited college or university at the rate of 30 semester hours for 12 months of experience. The education must have been in fields directly related to Production Control.
Transcripts must be provided only if substituting education for experience.
EMPLOYMENT CONDITIONS:
Technicians are paid through Direct Deposit/Electronic Funds Transfer (DD/EFT).
The Selected applicant must complete a Declaration of Federal Employment: prior to the appointment date.
Military Technicians are ineligible for military enlistment, retention, and student loan repayment bonuses. Acceptance of a Technician position will terminate these military incentives.
Acceptance of a permanent or indefinite position will cause termination from the Selected Reserve Incentive Program (SRIP).
Relocation expenses will not be paid by the Government unless noted in the Announcement.
Military Technicians in the excepted service will wear the appropriate uniform while performing as a Technician.
Veteran's preference does not apply to National Guard Technician positions in accordance with Title 32 USC 709(f).
Once the application process is complete, a review of your application will be made to ensure you meet the job requirements. To determine if you are qualified for this job, a review of your resume and supporting documentation will be made and compared against your responses to the occupational questionnaire. The rating you receive is based on your responses to the questionnaire and supporting documents. If, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your score can and will be adjusted to more accurately reflect your abilities.
Please follow all instructions carefully. Errors or omissions may affect your rating. Making a false statement in any part of your application may result in disciplinary action.
To apply for this position, you must provide a complete Application Package which includes:
1. Your R sum
2. A complete Assessment Questionnaire
3. Other supporting documents :
College transcript(s), only if qualifying based on education
Enlisted Records Brief (ERB)
OF-306, Declaration for Federal Employment
To begin the process, click the Apply Online button to create an account or log in to your existing USAJOBS account. Follow the prompts to complete the assessment questionnaire. Please ensure you click the Submit My Answers button at the end of the process.
Note: To verify your application is complete, log into your USAJOBS account,
, select the Application Status link and then select the more information link for this position. The Details page will display the status of your application, the documentation received and processed, and any correspondence the agency has sent related to this application. Your uploaded documents may take several hours to clear the virus scan process.
To return to an incomplete application, log into your USAJOBS account and click Update Application in the vacancy announcement. You must re-select your resume and/or other documents from your USAJOBS account or your application will be incomplete.
To fax supporting documents you are unable to upload, complete this cover page using the following Vacancy ID 1124614. Fax your documents to .
If you cannot apply online:
1. Click the following link to view and print the assessment questionnaire View Occupational Questionnaire, and
2. Print this 1203FX form to provide your response to the assessment questionnaire and
3. Fax the completed 1203FX form along with any supporting documents to . Your 1203FX will serve as a cover page for your fax transmission.
For this job announcement the following documents are required:
Records Review
Wyoming Army National Guard members must submit Enlisted Record Brief (ERB) with application. Must be current within 6 months.
Personal Resume
Include the following information:
Announcement # and title of the position for which you are applying
Your full name, mailing address, and phone numbers where you can be reached (must be on the resume)
A narrative of your work (paid or unpaid), training, education, and/or other experiences that may be related to this vacancy
Show actual begin and end dates (MM/YY - MM/YY) format for all work experience submitted
List all pertinent military experiences
Describe your duties (work experience) in your own words. Do not submit copies or official position descriptions.
OF-306, Declaration for Federal Employment
College transcripts MUST be submitted when substituting education for experience. Unofficial copies will be accepted. Definitions for Qualifying Education for each GS Grade are located HERE.
NOTE: Incomplete applications will not be considered. It is the responsibility of the applicant to contact William E. Pacheco prior 1600 Hrs on Tuesday, June 03, 2014 to verify all documents have been received. Failure to do so may result in disqualification. Complete and accurate data is essential to ensure fair evaluation of candidates. It is the applicant''s responsibility to ensure the data provided is accurate and complete. Only the experience, qualifications, and education shown on resume can be used to evaluate a candidate''s qualifications for this position.
To submit the documents requested follow the instructions below: Yourresume, curriculum vitae, or any other written format you choose to describe your job-related qualifications. Your document(s) can be submitted electronically using the document upload process or by fax. Please ensure that your resume contains your full name, address, phone and at least your last four digits of your social security number.
Instructions for completing the OPM 1203-FX:
If you are applying to this announcement by completing the OPM 1203-FX form instead of using the Online Application method, please use the following step-by-step instructions as a guide to filling out the required questionnaire. You will need to print the vacancy announcement and refer to it as you answer the questions. You may omit any optional information; however, you must provide responses to all required questions. Be sure to double check your application before submission.
View Occupational Questionnaire
The following Web addresses are provided for your reference to explore the major benefits offered to most Federal employees.
Main site for new federal employees
Flexible Spending Accounts - Allows you to pay for certain health and dependent care expenses with pre-tax dollars.
Health Insurance - Offers over 100 optional plans.
Leave - Most Federal employees earn both annual and sick leave.
Life Insurance - FEGLI Program offers Basic Life Insurance plus three types of optional insurance.
Long Term Care Insurance - FLTCIP provides long term care insurance for Federal employees and their parents, parents-in-law, stepparents, spouses, and adult children.
Retirement Program - Almost all new employees are automatically covered by the Federal Employees Retirement System (FERS). FERS is a three-tiered retirement plan. The three tiers are: Social Security Benefits, Basic Benefit Plan, and Thrift Savings Plan.
1. If you are a male applicant who was born after 12/31/59 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
2. Please _do not send/fax/courier/email any applications or resumes_ to the Wyoming National Guard Human Resource Office, you _must apply on-line or fax your application to the fax number listed on this announcement_ with the prescribed Cover Letter. The Human Resource can only process materials received through USA Jobs.
3. The Wyoming Military Department''s (WYMD) 335, Personnel - General Merit Placement & Promotion Plan, 1 June 2013 is availableHERE.Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
